Cisco Profile Series Manuale d'uso - Pagina 22

Sfoglia online o scarica il pdf Manuale d'uso per Server Cisco Profile Series. Cisco Profile Series 44. Jbod on the 12g sas modular raid controller
Anche per Cisco Profile Series: Manuale introduttivo (41 pagine), Manuale d'uso (7 pagine), Manuale introduttivo (35 pagine), Manuale di riferimento rapido (2 pagine), Manuale di installazione (44 pagine), Manuale di configurazione (13 pagine), Scheda di installazione (2 pagine), Manuale di installazione (2 pagine), Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (4 pagine), Manuale di installazione (16 pagine), Manuale introduttivo (32 pagine), Manuale (16 pagine), Manuale introduttivo (42 pagine), Manuale introduttivo (46 pagine)

Stampa la pagina
Cisco Profile Series Manuale d'uso
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents
Getting started

Receiving another incoming call

This is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
Assume that you are in a call. This call can
be a point-to-point call or a multisite call.
Furthermore assume that another person
calls you.

Features when putting someone on hold

This is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
If you have put one on
hold, tap that one to
resume.
D14582.07
User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
Using directories
22
In-call features
In-call features
Settings
You may now:
•
Tap
Accept
to include the incoming call in the
conference.
•
Tap
Decline
to carry on as you did.
•
Tap
Accept & Hold Current
while at the same time put the current call on
hold.
•
Tap
Accept & End Current
while at the same time end the current call.
•
Tap
Ignore
to carry on as you did, without
sending decline signal to the other end.
Even an entire group can be put on hold, so the
above options apply equally well to point-to-point
calls as to multisite calls.
You may now:
•
Tap
Swap
to put the other on hold instead.
•
Tap
Join
to include the one on hold in the
current call.
•
Tap
Transfer
somebody else.
If you are in a point-to-point call only, you may
still put the other party on hold and transfer the
other party to someone else.
See
"Transferring an ongoing call" on page
23 for more.
User guide
Contact us
to accept the call,
to accept the call,
to connect the one on hold to
www.cisco.com