B2 Audio M 12 Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore B2 Audio M 12. B2 Audio M 12 6. High performance amplifier
Stampa la pagina4-3. SPEAKER CONNECTION
B2
amplifier series recommends 12 AWG speaker connecting cables.
Run 12 AWG speaker connecting cables from your speakers to amplifier's mounting location.
Keep speaker cables away from power cables and
Use grommets anywhere the cables have to pass through the holes in the metal frame or sheet
metal. Connect to the speakers according to terminals on each speaker.
Strip 3/8" of insulation from the end of each cable and twist the cables strands together tightly.
Make sure there are no stray strands that might touch other cables or terminals and cause a short circuit.
Crimp spade lugs over the cable ends or tin the ends with solder to provide a secure termination.
Connect the cable ends to
M12
SPEAKER CONNECTION DIAGRAM
2 OHM MONO BRIDGED MODE SPEAKER CONNECTION
1)
of subwoofer 1 terminal to
Connect
2) Connect
of subwoofer 2 terminal to
3) Connect
of subwoofer 1 terminal to
B2
series amplifiers as show on the speaker system diagram.
of subwoofer
of subwoofer
of subwoofer 2 terminal
8 ~ 2 Ohms
B2
series amplifier's input cables.
!
Caution :
Use 12 gauge Jumper wire
to connect - from subwoofer 1 t0 + subwoofer2
for bridged mode use only
5