Cisco TelePresence Scheda di installazione

Sfoglia online o scarica il pdf Scheda di installazione per Server Cisco TelePresence. Cisco TelePresence 2. Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server
Anche per Cisco TelePresence: Opuscolo (4 pagine), Specifiche tecniche (7 pagine), Manuale di installazione (4 pagine), Manuale dell'amministratore (27 pagine), Manuale di riferimento rapido (2 pagine), Manuale (24 pagine)

Stampa la pagina

Cisco TelePresence Scheda di installazione

Installing Cisco TelePresence System Profile 52" Dual

The Profile 52" Dual delivery contains:

Monitor box:

Monitor back cover box:

• Two monitors and

• Monitor back cover

speaker grilles

• Monitor brackets

Bottom module column

• M4×25 and M4×8 screws for the monitor

brackets

Camera

• Camera bracket

Touch Screen CS

• Wing nuts for the camera bracket

Foot module box:

Accessories box:

• Foot module (stand-alone or wall

• Cables

mounting)

• Microphones, 4 pcs

• Four M8×45 screws

• Remote control and 4 AAA batteries

• Two wall mounting brackets and four

• Gloves, 2 pairs

M6×10 screws (for wall mounting only)

• Cleaning cloth

• Wrench

• Allen key, screwdriver

• Level adjustment tool (orange)

• Four M8×16 screws

Unpacking and assembling Profile 52" Dual

Content overview

Remove the outer cover and locate the different boxes as illustrated below.

HEAVY

CAUTION

Bottom module column

Monitor back cover and monitor brackets

HEAVY

CAUTION

Foot module

Touch screen

Accessories box

Camera

Rev. Date

Prep.

Checked Change

Telecom AS

120601 rev.

Packaging Kit Profile 52" Dual

3D CAD model file 120601 rev. 03 is master

HEAVY

The monitors come in a separate box. The monitor box contains monitors and speaker grilles

for the monitors. Remove the lid and locate the left and right monitor and the speaker grilles.

CAUTION

Right and left monitor

Left monitor

Right monitor

Lift the column out of the package. Mount the column to the foot

module to complete the bottom module

Grab here when

lifting the column.

HEAVY

CAUTION

Sheet 1 of 1

Processes

Tolerances

Specification:

Material

Surface treatment

Type:

European

Manufacturer:

projection

Type number:

Thickness:

Unit:

Dimensions without paint or finish

Color:

WHEN YOU HAVE A WALL MOUNTING FOOT MODULE:

Surface:

Sheet size:

All materials, finishes, and proccesses

must comply with the RoHS directives

Glossiness:

Scale:

1:8

Flame class:

Part weight:

71743g

Flame class requirement: -

UL reference:

Mount the column to the foot module and fasten it to the wall

Mount the column to the wall mounting foot module, similar to step 2.

Fasten the wall brackets to the bottom module with the four M6×10 screws.

Use the Allen key.

Place the bottom module by the wall, mark where to fasten the bracket and

move the bottom module away.

Add the suitable fixing device for the screws in the wall, and fasten the

bottom module.

LEVELLING ADJUSTMENT

Make sure the unit is stable.

Place the orange level adjustment tool on the

foot wheel under the foot module for height

adjustment.

Seen from above, turn clockwise to adjust the

height up. Use the opposite side of the tool

and turn counterclockwise to adjust down.

PRECAUTIONS

Please follow the steps in this installation guide when unpacking and

assembling Profile 52" Dual.

MANPOWER

A minimum of two (2) persons are required when installing

Profile 52" Dual.

UNPACKING THE SYSTEM AT THE DESTINATION

It is highly recommend to start the unpacking and assembling of

Profile 52" Dual at the place where it is to be used.

If it is not possible to bring the complete delivery to the room where

Profile 52" Dual is to be used, then unpack and bring the smaller units

to the destination.

• The monitor box requires two (2) persons to lift 55 kg / 121 lb).

Column

• The bottom module column requires two (2) persons to lift

(40 kg / 88 lb).

Stand-alone

• The foot module requires two (2) persons to lift

foot module

(stand-alone: 35 kg / 77 lb; wall-mounting: 20 kg / 44 lb).

FASTEN THE COLUMN TO THE FOOT MODULE

Make sure the foot module has been placed at its permanent location.

Place the column on the foot module, open the rear door, and remove the door

stop bracket.

Carefully open the rear door completely.

Use four M8×45 screws and fasten the column to the foot module.

Mount the door stop bracket back in place.

Use the wrench to remove the door

stop bracket on the rear door before

fastening the column to the foot module.

Rear side

Door stop bracket

Page 1

INSTALLATION NEAR A SOCKET-OUTLET

DIMENSIONS OF THE PROFILE 52" DUAL

The equipment must be installed near a socket-outlet. The socket-

• Height: 63.8" / 162 cm

outlet shall be easily accessible after installation.

• Width: 94.9" / 241 cm

• Depth (wall mounting): 10.2" / 26 cm

ROOM GUIDELINES

• Depth (stand-alone): 17.7" / 45 cm

NOTE:

The floor must be in level.

• Weight: 518 lb / 235 kg

The recommended distance between the Profile 52" Dual and the

meeting room table should be minimum 1.5 m / 59 in.

Read more about room guidelines in the Video conferencing room

primer.

USER DOCUMENTATION

The user documentation for this product, including compliance and

safety information, is available on the Cisco web site.

Go to: http://www.cisco.com/go/telepresence/docs.

Access the innermost screws from these holes.

EMC A Class declaration

4 * M8×45

Fasten the column

Allen key

to the foot module.

The bottom module is viewed from the rear side.

WARNING

Due to the size and weight of this equipment, it is very

important that the wall mount unit is safely installed according

to the installation instructions and that the wall is able to safely

support the product. It is highly recommended that the wall

mounted system is installed by trained personnel.

Add the suitable fixing device for the screws in the wall.

4 * M6×10

Allen key

Fasten the column

to the foot module.

The wall