finder 12.A4 Manuale

Sfoglia online o scarica il pdf Manuale per Timer finder 12.A4. finder 12.A4 3. Digital astro time switch with on/off contact output and 0-10 v or pwm signal output

Stampa la pagina
1
12.A4
2
3
4
Utility Model - IB12A4 - 02/22
Finder S.p.A. con unico socio
10040 ALMESE (TO) - ITALY
ENGLISH
12.A4 DIGITAL ASTRO TIME SWITCH with ON/OFF CONTACT
OUTPUT and (0 -10 V or PWM) SIGNAL OUTPUT
The 0-10 V / PWM output signal can be programmed to ramp up or
down to the programmed output value
of change (PI)
4
A
"Switching" times are easily set using either the seasonally variable
times of the Astro SUNSET and Astro SUNRISE functions, or the specific,
fixed time-of-day of the TIMED function - or any combination of all three.
DISPLAY INDICATORS
A
Setting
B
Days of the week (1=Mon...7=Sun)
C
Holiday program
D
Permanent Manual Mode (active)
E
Channel A functions:
Astro ON, Astro OFF, Pulse (TIMED event + 0 -10 V / PWM)
F
Day - Advanced/Retarded - % output signal
G
Time, postcode (CP), percentage change in output power per
second (PI), year (Y), day (D), month (M), hours (H), minutes (M),
Daylight saving ON/OFF, Holiday program [Start: D (day), M (month).
Finish: D (day), M (month)] PIN, exit menu (END)
H
- Low battery (with power supply)
- Time switch without external power (powered by battery)
I
Cancel
L
Event memory location (max 50) - Country, Leading two characters of CP,
PI, [Coor: geographic coordinates in degrees: N(North) / S(South),
E(East) / W(West), TZ(Time zone)], Y(year), D(day), M(month), H(hour),
M(minutes), Daylight saving ON/OFF (EU: Europe, BR: Brazil, MX: Mexico)
[holiday program: Start: day(D), month(M); Finish: day(D), month(M)]
M
Saved event
WIRING DIAGRAM: output 0-10V
WIRING DIAGRAM: output PWM
SETTINGS (examples)
A
Back-lit display (only when externally powered)
4a
Setting: Country (IT), CP (leading two characters of CP), percentage
change in output power per second (PI), year(Y), day(D),month(M),
hour(H), minutes(M), Daylight saving ON/OFF (EU: Europe, BR: Brazil,
MX: Mexico), PIN, exit menu (END)
4b
Holiday program
(Start: day/month. Finish: day/month), PIN, exit menu (END)
4c
Setup by geographic coordinates. Start at 4a, select Country IT
or CP 00 stage, scroll down with
. Continue by setting the
coordinates and time zone. Latitude: North (N) - South (S).
Longitude: East (E) - West (W). Time zone(TZ)
5
, at a predetermined rate
F
5
PROGRAMMING (examples)
A
Back-lit display (only when externally powered)
B
NP: New Programming event
C
01, 02..: event memory location (Max 50)
5.1
ASTRO ON: Signifies programming the Astro SUNSET conditions -
advance/retard
D
- applicable days
(0-10V / PWM)
F
5.2
ASTRO OFF: Signifies programing the Astro SUNRISE conditions -
D
advance/retard
- applicable days
F
(0-10V / PWM)
5.3
PULSE: Signifies programing the conditions for a TIMED event -
time of event
G
- applicable days
(0 -10V / PWM)
F
D
Advance or retard from the Astro time (up to 90 minutes)
E
Set applicable day(s) of the week (1 = Mon ... 7 = Sun)
F
Set % value of the output signal (0-10 V / PWM)
G
Set time of day for TIMED event (00:00 ... 23:59)
6
MANUAL MODE (Manually change the current output value)
Pushing the joystick towards
(6a) or towards
to modify the value of the output signal between 1% and 99%.
Note: the output contact (11-14) will be open for values below 10%,
and will be closed for values above 10%.
NB: This setting will remain in force until the next programmed event.
7
PERMANENT MANUAL MODE
By activating the permanent manual mode 7a, the program of events
will be ignored (whilst the current signal output level is maintained).
De-activating the mode 7b, and the device returns to follow the program
of events, responding to the next occurring event.
8
DELETION of all programmed events
A
Back-lit display (only when externally powered)
9
DELETION of a single programmed event
A
Back-lit display (only when externally powered)
NOTE
- Battery replacement: BATTERY CR 2032 (LiMnO
Complies with Article 11, EU directive 2006/66/CE.
Dispose of batteries according to local regulations
- Back-lit display (only when externally powered)
- ASTRO times vary over the year
- PWM 0% = output contact open
- (0 -10 V) ≤9% = output contact open
- Maximum cable length: 20 m (0 -10 V) - 10 m (PWM)
- PWM: setting 0-99% - resolution 1%
- 0 -10 V: setting 0-99% - resolution 1%
E
- required % output setting
E
- required % output setting
E
- required % output setting
(6b) it is possible
) 3V, 230mAh.
2