Cisco UCS B200 M3 Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Server Cisco UCS B200 M3. Cisco UCS B200 M3 34. Blade server
Anche per Cisco UCS B200 M3: Nota di installazione e manutenzione (36 pagine), Nota di installazione e manutenzione (37 pagine), Manuale (8 pagine), Manuale di aggiornamento (21 pagine), Nota di installazione e manutenzione (28 pagine)

Step 2

Open the ejector lever in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Step 5

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers only is unlikely

to lead to stripped or damaged captive screws.

Step 6

Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the server, provided

any hardware changes are allowed by the service profile.

Secure Digital (SD) Card Access

SD card slots are provided for future usage. Their use is not supported at product release. They will require a future software update

to be used.

Figure 6: SD Card Slot Locations

Replacing the cover is the reverse of removing the cover. To open a blade server, follow these steps: