Digitus DS-30220-4 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per PCI Card Digitus DS-30220-4. Digitus DS-30220-4 3. Usb 3.0, 2-port pci express add-on card

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer's cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card's bus connector

with the selected PCIe slot on the motherboard.

Push the board down firmly.

5. Replace the slot bracket's holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

For Windows

1. Please insert the CD driver bound with USB 3.0 2-Port PCI

Express Add-On Card into your CD-ROM Drive.

2. At the Windows desktop, click Start, Run.

3. Type D:\RENESAS NEC uPD720200F1\Setup.exe, click OK.

(Change D: to match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the installation.

To Verify Driver Installation

Click on the "Device Manager" tab in System Properties, which you

access from the Windows Control Panel. You should see a "NEC

Electronics USB 3.0 Host Controller" and a "NEC Electronics USB

3.0 Root Hub" under the "Universal Serial Bus controllers" item.

XP/Vista/Win7/8 (32/64 bit)