Cisco UCS B200 M3 Manuale di aggiornamento - Pagina 10

Sfoglia online o scarica il pdf Manuale di aggiornamento per Server Cisco UCS B200 M3. Cisco UCS B200 M3 21. Blade server
Anche per Cisco UCS B200 M3: Manuale di installazione (34 pagine), Nota di installazione e manutenzione (36 pagine), Nota di installazione e manutenzione (37 pagine), Manuale (8 pagine), Nota di installazione e manutenzione (28 pagine)

Cisco UCS Blade Server

Upgrade Scenario 1: UCSM and BIOS Earlier Than Version 2.2(2c), CPU Earlier Than Intel E5-2400 v2

This scenario assumes the following conditions:

•

In this case, use the following procedure to upgrade the server and CPUs.

Upgrade the Cisco UCS Manager software to version 2.2(2c) or later. The required server CIMC and

Step 1

BIOS are also included with the 2.2(2c) download bundle.

Use the procedures in the appropriate upgrade guide for Release 2.1 in the

Upgrade Guides

Use Cisco UCS Manager 2.2(2c) to upgrade and activate the server CIMC to version 2.2(2c) or later.

Step 2

Use the GUI or CLI procedures in the

Use Cisco UCS Manager 2.2(2c) to upgrade and activate the server BIOS to version 2.2(2c) or later.

Step 3

Use the GUI or CLI procedures in the

Disassociate the server in Cisco UCS Manager.

Step 4

Power off the server.

Step 5

Replace the CPUs with the Intel E5-2400 v2 Series CPUs.

Step 6

Use the procedures in the

Reinsert the server to the chassis.

Step 7

Wait for Cisco UCS Manager to automatically discover the server.

Step 8

Note

Perform a board controller activation by using the Cisco UCS Manager CLI interface. Use the following

Step 9

sequence of commands:

Note

# scope server <chassis/server>

# scope boardcontroller

# show image

# activate firmware <boardcontroller version>.0 force

# commit-buffer