Cisco UCS B200 M4 Nota di installazione e manutenzione - Pagina 17

Sfoglia online o scarica il pdf Nota di installazione e manutenzione per Server Cisco UCS B200 M4. Cisco UCS B200 M4 46. For e5-2600 v4 series cpus
Anche per Cisco UCS B200 M4: Nota di installazione e manutenzione (30 pagine), Manuale di aggiornamento (9 pagine), Manuale di manutenzione (24 pagine)

Installing a Blade Server

Server Configuration

Cisco UCS blade servers should be configured and managed using Cisco UCS Manager. For details, see the

Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides are

available at the following URL:

configuration_guides_list.html

You can also shut down servers remotely using Cisco UCS Manager or CIMC. For details, see the

Tip

Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides

are available at the following URL:

and_configuration_guides_list.html

Procedure

Step 1

If you are local to the server, check the color of the Power Status LED for each server in the chassis that you

want to power off.

• Green indicates that the server is running and must be shut down before it can be safely powered off.

• Amber indicates that the server is already in standby mode and can be safely powered off. Go to Step 3.

Step 2

Press and release the Power button, then wait until the Power Status LED changes to amber.

The operating system performs a graceful shutdown and the server goes to standby mode.

Caution

Step 3

(Optional) If you are shutting down all blade servers in a chassis, disconnect the power cords from the chassis

to completely power off the servers.

Step 4

Remove the appropriate servers from the chassis.

Using UCS Manager, decommission the server before physically removing the server. To remove a blade

server from the chassis, follow these steps:

http://www.cisco.com/en/US/products/ps10281/products_installation_and_

Go to Step 2.

To avoid data loss or damage to your operating system, you should always invoke a graceful

shutdown of the operating system.

http://www.cisco.com/en/US/products/ps10281/products_installation_

Cisco UCS B200 M4 Blade Server Installation and Service Note

Server Configuration