Cisco UCS C210 M2 Manuale di avvio rapido - Pagina 5

Sfoglia online o scarica il pdf Manuale di avvio rapido per Server Cisco UCS C210 M2. Cisco UCS C210 M2 12. Security manager 4.3

•

Tip

Note

If you enable Windows firewall, all the required inbound ports for Security Manager are blocked by

default. You must ensure that required ports are enabled and available for use by Security Manager and

its associated applications on your server so that the server can communicate with clients and servers

running associated applications. To find the list of ports that are required to be enabled in Windows

firewall, refer to "Required Services and Ports" in the "Requirements and Dependencies" chapter of the

Installation Guide for Cisco Security Manager 4.3 at the following URL:

http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma

nager/4.3/installation/guide/requirem.html#wp1060450.

Cisco Security Manager tuning done (this was done by Cisco before shipment of the Bundle to you):

•

Performance Parameters

Your new Bundle was tuned for specific performance parameters:

The low-end hardware configuration (16 GB RAM, 4 x 500 GB HDD) provides support for 50 devices.

This configuration is suitable for a small enterprise deployment. The maximum number (cumulative) of

events per second supported is 5000 events per second [this value is a 9:1 ratio of syslogs to IPS SDEE

(i.e., 4500 syslog + 500 SDEE)].

Cisco does not recommend (1) attempting to expand the capabilities of the low-end hardware

Note

configuration (16 GB RAM, 4 x 500 GB HDD) by adding licenses or hardware or (2) otherwise

attempting to change the license configuration or hardware or both; the Bundle was tested as shipped.

78-21007-01

Virtual memory configured.

Windows firewall disabled.

Current Windows updates installed.

Windows Update settings set to "Check for updates but let me choose whether to download and

install them."

Windows firewall is disabled by default. If you want to enable Windows firewall, follow these

steps:

Open Server Manager. (To open Server Manager, right-click Computer and click Manage. Or,

select Start > Programs > Administrative Tools > Server Manager.)

Under "Security Information," click Go to Windows Firewall.

Under "Overview," click Windows Firewall Properties.

Under "State," change "Firewall State" to "On."

D:\Program Files\CSCOpx used for installation.

Default usernames and passwords established.

Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide

Performance Parameters