Cisco 2800 Series Manuale di avvio rapido - Pagina 28

Sfoglia online o scarica il pdf Manuale di avvio rapido per Porta d'ingresso Cisco 2800 Series. Cisco 2800 Series 47. Cisco ios software configuration
Anche per Cisco 2800 Series: Manuale di avvio rapido (13 pagine), Scheda tecnica (8 pagine), Nota applicativa (41 pagine), Manuale di avvio rapido (45 pagine), Configurazione (10 pagine), Panoramica (27 pagine), Scheda tecnica (5 pagine), Scheda tecnica (20 pagine), Configurazione (32 pagine)

System Management Connections

The connections described in Table 4 provide system management access.

Table 4

System Management Connections

Port

Console

Auxiliary

Universal serial bus (USB)

To ensure adequate cooling, never operate the router unless the cover and all modules and cover plates are installed.

Caution

You are ready to power up the Cisco 2800 series integrated services router after the following steps are completed:

• Chassis is securely mounted and grounded. (See the "Install Chassis" section on page 6.)

• Power and interface cables are connected. (See the "Connect Cables" section on page 19.)

• Make sure that the external CompactFlash memory card is properly seated into the slot. For installation instructions, see

the online Cisco 2800 series hardware installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/2800/hw/index.htm

• PC with terminal emulation program is connected to the console port, powered up, and configured for 9600 baud, 8 data

bits, 1 stop bit, no flow control, and no parity. (See the "System Management Connections" section on page 28.)

• Suitable PC COM port is selected in the terminal emulation program.

For initial power-up, a direct console connection is recommended. After the initial configuration is completed, a remote

Note

modem connection can be used for router management.

To ensure adequate cooling, never operate the router unless the cover and all modules and cover plates are installed.

Caution

To prevent damage to the ejector mechanism, the ejector button next to the CompactFlash card must remain fully

seated when not being used to eject a CompactFlash card.

Color

Connection

Light blue

PC or ASCII terminal communication port

(usually labeled COM)

Black

Modem for remote access

—

Peripheral devices

Cable

RJ-45-to-DB-9 console cable

RJ-45-to-DB-25 modem cable

USB cable