Router> enable
Router#
Step 5
For configuration procedures, see the applicable configuration instructions in the Cisco 2800 series software
configuration documents. See the "Where to Go Next" section on page 36 for information about accessing these
documents.
Note
To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use
the copy running-config startup-config command to save the configuration to NVRAM.
Step 6
When you have finished the initial configuration, verify the initial configuration. See the "Verify the Initial
Configuration" section on page 36 for verification procedures.
Verify the Initial Configuration
Verify that the new interfaces are operating correctly by performing the following tests:
• To verify that the interfaces are operating correctly and that the interfaces and line protocol are in the correct state—up or
down—enter the show interfaces command.
• To display a summary status of the interfaces configured for IP, enter the show ip interface brief command.
• To verify that you configured the correct hostname and password, enter the show configuration command.
When you complete and verify the initial configuration, your Cisco router is ready to configure for specific functions. See the
"Where to Go Next" section on page 36 for information about locating documentation for advanced configuration procedures.
9
Where to Go Next
For additional configuration procedures, see the appropriate Cisco 2800 series routers documentation or Cisco IOS software
documentation, available online on Cisco.com.
Tip
See the "Obtaining Documentation" section on page 36 for help in locating these documents.
To access documentation on Cisco.com:
For Cisco 2800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and choose Products &
Solutions > Routers & Routing Systems > Cisco 2800 Series Integrated Services Routers > Technical Support and
Documentation > Cisco 2800 Integrated Services Routers document type > Document.
For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and choose Products & Solutions > Cisco
IOS Software > Latest Releases > Your Cisco IOS software release.
To get updated information about platform support for features, access Feature Navigator II at http://www.cisco.com/go/fn.
(This requires a registered account on Cisco.com.)
To access documentation using Cisco Connection Online (CCO):
For Cisco 2800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and click the Technical
Support and Documentation link. Click the Former Technical Documentation site link and navigate to Modular Access Routers
and to the documentation for your router.
For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and click the Technical Support and
Documentation link. Click the Former Technical Documentation site link and navigate to the Cisco IOS software documentation
for the Cisco IOS software release that is installed on your router.
36
Stampa la pagina