Digitus DN-16062 Manuale di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione per Telecamera di sicurezza Digitus DN-16062. Digitus DN-16062 17. Hd network

3.4 Network configurations

Step1:

Click "Config" in the live view page of your browser to enter the configuration page.

Then, click "Camera"  "Camera".

Step2:

In this page, define your installation environment as indoor or outdoor, and set other

parameters related to your network environment.

Item

Environment

Frame Rate

Stream Format

ADSL Upload Speed

Click "Network"  "Network" to select the connection type: Static IP / PPPoE / DHCP.

Step1:

Note:

This camera doesn't support POE router or hub.

Description

Select the current environment for the camera to automatically adjust itself to produce the

images suitable for the selected environment.

The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the

network.

Set the desired image frequency to the maximum (FULL) or to a specified frame rate (1/2;

1/3; 1/4; 1/5; 1/10; 1/15).

The actual frame rate depends on the actual network connection, and may be lower than the

specified one.

Select the stream format to H.264 / MPEG-4 / Motion JPEG / Multi-Mode suitable for your

network bandwidth.

Note:

Motion detection is not supported when the stream format is set to Motion JPEG.

Face detection is not supported when the stream format is set to Multi-Mode.

Select your Internet upload speed, and the system will automatically adjust your data flow.

The options are: Local (>2Mbps) / 2M (2000Kbps) / 1M (1000Kbps) / 640Kbps / 512 Kbps /

256Kbps / 128 Kbps / 64Kbps