Cisco 3700 series Istruzioni per l'aggiornamento - Pagina 22
Sfoglia online o scarica il pdf Istruzioni per l'aggiornamento per Porta d'ingresso Cisco 3700 series. Cisco 3700 series 30. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Anche per Cisco 3700 series: Installazione e formattazione (34 pagine), Scheda tecnica (8 pagine), Nota applicativa (41 pagine), Manuale di installazione (12 pagine)
Stampa la pagina
Upgrading System Memory in Cisco 3745 Routers
Figure 10
Step 4
When both ends of the SODIMM are released from the socket, grasp the ends of the SODIMM with your
thumb and forefinger and pull it completely out of the socket. Place it in an antistatic bag to protect it
from ESD damage.
If necessary, repeat
Step 5
Proceed to the
Step 6
Installing SDRAM SODIMMs
To install SDRAM SODIMMs, follow these steps:
Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the
Step 1
equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the
connectors.
Step 2
On the mainboard, locate the SDRAM SODIMM socket. (See
Caution
Handle the SODIMM by the edges only; do not touch the memory modules, pins, or traces (metal fingers
along the connector edge). Handle carefully. SODIMMs are ESD-sensitive components and can be
damaged by mishandling.
Upgrading System Memory in Cisco 3700 Series Routers
22
Removing and Installing SDRAM SODIMMs in the Cisco 3745 Router
Pull the tabs away with
your thumbs, bracing your
forefingers against the
rails. The memory module
will pop loose. Then raise the
memory module to a
vertical position.
Memory module
Step 3
and
Step 4
to remove the bottom SODIMM.
"Installing SDRAM DIMMs" section on page
15.
Figure
9.)
OL-5423-02