Cisco 3800 Series Manuale di avvio rapido - Pagina 34

Sfoglia online o scarica il pdf Manuale di avvio rapido per Porta d'ingresso Cisco 3800 Series. Cisco 3800 Series 40. Password recovery procedure
Anche per Cisco 3800 Series: Scheda tecnica (8 pagine), Nota applicativa (41 pagine), Manuale di risoluzione dei problemi (15 pagine), Scheda tecnica (20 pagine), Configurazione (32 pagine), Manuale d'uso (7 pagine)

Several messages appear, ending with a line similar to the following:

...

Compiled <date> <time> by <person>

Press Return to display the Router> prompt:

Step 3

...

flashfs[4]: Initialization complete.

Router>

Enter privileged EXEC mode:

Step 4

Router> enable

Router#

For configuration procedures, see the applicable configuration instructions in the Cisco 3800 series software

Step 5

configuration documents at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3800/sw/index.htm

Note

To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use

the copy running-config startup-config command to save the configuration to NVRAM.

Step 6

When you have finished the initial configuration, verify the initial configuration. See the "Verify the Initial

Configuration" section on page 34 for verification procedures.

Verify the Initial Configuration

Verify that the new interfaces are operating correctly by performing the following tests:

• To verify that the interfaces are operating correctly and that the interfaces and line protocol are in the correct state (up or

down), enter the show interfaces command.

• To display a summary status of the interfaces configured for IP, enter the show ip interface brief command.

• To verify that you configured the correct hostname and password, enter the show configuration command.

When you complete and verify the initial configuration, your Cisco router is ready to configure for specific functions. See the

"Where to Go Next" section on page 34 for information about locating documentation for advanced configuration procedures.

Where to Go Next

For additional configuration procedures, see the appropriate Cisco 3800 series routers documentation or Cisco IOS software

documentation, available online on Cisco.com.

Tip

See the "Obtaining Documentation" section on page 35 for help in locating these documents.

To access documentation on Cisco.com:

For Cisco 3800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and choose Products &

Solutions > Routers > Cisco 3800 Series Integrated Services Routers > Technical Documentation > Document type > Document.

For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and choose Products & Solutions > IOS

Software > Cisco IOS Software Releases > Your Cisco IOS software release.

To get updated information about platform support for features, access Cisco Feature Navigator II at

http://www.cisco.com/go/fn. (This requires a registered account on Cisco.com.)