Cisco 3G MicroCell Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Porta d'ingresso Cisco 3G MicroCell. Cisco 3G MicroCell 20. At&t wireless network gps signal extender
Anche per Cisco 3G MicroCell: Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale di avvio rapido (8 pagine)

Stampa la pagina

Step 2. Startup

Note: Make sure all Ethernet cabling is complete before performing this task.

1. Turn off power to your PC, router (if you have one), modem or gateway.

Note: If equipped with a backup battery, it may be necessary to press "reset" on your modem or gateway. See the user

documentation for your device.

Make sure all of the devices are turned off before you go to the next step.

2. Wait a minute, then turn on the modem or

gateway first, the router second (if you have

one), and the PC last. Wait a few moments

before turning on each device.

3. Find the AC adapter that came with your

MicroCell and connect it as shown.

4. Verify the status of your devices.

• Make sure that the Power status

indicator on the front panel is steady

green and that the Ethernet and PC

status indicators are flashing or steady

green.

• Make sure that the status indicators on

your router (if you have one), modem or

gateway are operating as they normally

do (this may take a few minutes).

5. Open a browser on your PC and connect

to the Internet.

Go to the AT&T 3G MicroCell™ home page:

If you can connect to the MicroCell home page, then you have performed the Ethernet Cabling and Startup tasks correctly.

Congratulations! Go to Step 3. Account Activation.

What if you can't connect to the AT&T 3G MicroCell™ home page?

If you are having trouble connecting to the Internet, confirm Step 1. Ethernet Cabling and Step 2. Startup. If that doesn't

help, refer to the Troubleshooting section on page 15.

4030453_RevA_6.75x8.25_Mar6.indd 11

AT&T 3G

MicroCell

™

Antenna

Computer

Ethernet

Reset

Power

att.com/3GMicroCell

AC Power

Power

Adapter

Outlet

T14078

3/6/2009 5:43:33 PM