Cisco ASR 9000 Series Configurazione delle impostazioni di rete - Pagina 6

Sfoglia online o scarica il pdf Configurazione delle impostazioni di rete per Porta d'ingresso Cisco ASR 9000 Series. Cisco ASR 9000 Series 26. Line card
Anche per Cisco ASR 9000 Series: Manuale di configurazione (46 pagine), Manuale di configurazione (50 pagine), Manuale (24 pagine), Configurazione (46 pagine), Manuale (44 pagine), Manuale di riferimento rapido (7 pagine)

Overview of Port Extender Model

Satellite Discovery and Control Protocols

A Cisco proprietary discovery and control protocol is used between the satellite switches and the host

Cisco ASR 9000 Series Router devices, to handle discovery, provisioning, and monitoring of the

satellite devices from the host Cisco ASR 9000 Series Satellite System in-band over the ICLs. The

Satellite Discovery And Control (SDAC) Protocol provides the behavioural, semantic, and syntactic

definition of the relationship between a satellite device and its host.

Satellite Discovery and Control Protocol IP Connectivity

The connectivity for the SDAC protocol is provided through a normal in-band IP routed path over the

ICLs using private and public IP addresses appropriate for the carrier's network.

You can configure a management IP address on the host CLI for each satellite switch and corresponding

IP addresses on the ICLs. You can select addresses from the private IPv4 address space (for example,

10.0.0.0/8 or 192.1.168.0/24) in order to prevent any conflict with normal service level IPv4 addresses

being used in the IPv4 FIB. You can also configure a private VRF that is used for only satellite

management traffic, so that the IP addresses assigned to the satellites can be within this private VRF.

This reduces the risk of address conflict or IP address management complexity compared to other IP

addresses and VRFs that are used on the router.

Layer-2 and L2VPN Features

All L2 and L2VPN features that are supported on physical ethernet or bundle ethernet interfaces are also

supported on Satellite Ethernet interfaces. For more details on L2VPN features supported on the Cisco

ASR 9000 Series Satellite System, see Cisco ASR 9000 Series Aggregation Services Router L2VPN and

Ethernet Services Configuration Guide.

Layer-3 and L3VPN Features

All MPLS L3VPN features that are supported on ethernet interfaces such as GRE, netflow, and so on,

are also supported on the Cisco ASR 9000 Series Satellite System. For more information on these

features, see Cisco ASR 9000 Series Aggregation Services Router MPLS Layer 3 VPN Configuration

Guide and Cisco ASR 9000 Series Aggregation Services Router Netflow Configuration Guide.

Layer-2 and Layer-3 Multicast Features

All Layer-2 and Layer-3 multicast features, including IGMP, IGMP snooping, PIM, mLDP, MVPN,

P2MP TE, are supported on Satellite Ethernet interfaces, as they are supported on normal Ethernet and

bundle ethernet interfaces. For more information on these features supported on a satellite system, see

Cisco ASR 9000 Series Aggregation Services Routers Multicast Configuration Guide.

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide

HC-712

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router

OL-26061-03