Cisco ASR 9000 Series Configurazione - Pagina 33
Sfoglia online o scarica il pdf Configurazione per Porta d'ingresso Cisco ASR 9000 Series. Cisco ASR 9000 Series 46. Line card
Anche per Cisco ASR 9000 Series: Configurazione delle impostazioni di rete (26 pagine), Manuale di configurazione (46 pagine), Manuale di configurazione (50 pagine), Manuale (24 pagine), Manuale (44 pagine), Manuale di riferimento rapido (7 pagine)
Stampa la pagina
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Configuring SDH AU-4
This task explains how to configure an SDH AU-4 stream into a TUG-3 channel mapped to E3s.
Prerequisites
•
Restrictions
•
•
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
OL-26061-03
You should know how to configure the SONET controller as specified in the
Clear Channel SONET Controllers"
on the Cisco ASR 9000 Series Router
Channelized SDH is supported on the following SPAs:
Cisco 1-Port Channelized OC-48/STM-16 SPA
–
Cisco 1-Port Channelized OC-3/STM-1 SPA
–
–
Cisco 2-Port Channelized OC-12/DS0 SPA
In this release, AU-4 paths can only be channelized into TUG-3s.
The 1-Port Channelized OC-48/STM-16 SPA does not support T1 or E1 channelization.
configure
controller sonet interface-path-id
clock source {internal | line}
framing sdh
au number
mode tug3
width number
tug3 number
mode mode
root
controller name interface-path-id
mode mode
root
controller name instance
channel-group number
timeslots num1:num2:num3:num4
or
timeslots range1-range2
show configuration
root
interface serial interface-path-id
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
How to Configure Channelized SONET/SDH
section of the
Configuring Clear Channel SONET Controllers
module.
"How to Configure
HC-349