Cisco ATA 186 Istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Porta d'ingresso Cisco ATA 186. Cisco ATA 186 6. Analog telephone adaptor
Anche per Cisco ATA 186: Configurazione (28 pagine), Scheda tecnica (7 pagine), Panoramica (11 pagine), Panoramica del manuale (11 pagine), Manuale di configurazione (8 pagine), Manuale d'uso (12 pagine), Manuale di installazione e configurazione (13 pagine), Configurazione (6 pagine)

Chapter 2

Installing the Cisco ATA

For more information about LEDs and the function button, see the

page

Power-Down Procedure

Caution

If you need to power down Cisco ATA 186 or Cisco 188 at any time, use the following power-down

procedure to prevent damage to the unit.

Procedure

Unplug the RJ45 Ethernet cable

Step 1

Wait for 20 seconds.

Step 2

Unplug the power cable.

Step 3

This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do

Warning

not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11

port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming

call.

OL-4804-01

1-5.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)

Power-Down Procedure

"Hardware Overview" section on

2-5