Cisco ATA 188 Panoramica

Sfoglia online o scarica il pdf Panoramica per Porta d'ingresso Cisco ATA 188. Cisco ATA 188 11. Analog telephone adaptor
Anche per Cisco ATA 188: Configurazione (28 pagine), Panoramica del manuale (11 pagine), Istruzioni per l'installazione (6 pagine)

Cisco Analog Telephone Adaptor Overview

This section describes the hardware and software features of the Cisco Analog Telephone Adaptor

(Cisco ATA) and includes a brief overview of the Media Gateway Control Protocol (MGCP).

Cisco ATA analog telephone adaptors are handset-to-Ethernet adaptors which allow regular analog

telephones to operate on IP-based telephony networks. Cisco ATAs support two voice ports, each with

an independent telephone number. The Cisco ATA 188 also has an RJ-45 10/100 BASE-T data port.

This section covers the following topics:

•

Overview of Media Gateway Control Protocol, page 1-2

Hardware Overview, page 1-3

•

Software Features, page 1-5

Installation and Configuration Overview, page 1-9

•

Figure 1-1

The Cisco ATA, which operates with Cisco voice-packet gateways, makes use of broadband pipes that

are deployed by means of a digital subscriber line (DSL), fixed wireless cable modem, and other Ethernet

connections.

The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.

Note

OL-4803-01

Cisco ATA Analog Telephone Adaptor

C IS C O A

T A 1 8 6

A N A L O G

T E L E PH

O N E A D

A PT O R

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for MGCP (version 3.0)

C H A P T E R

1-1