Cisco DPC3925 Manuale di avvio rapido - Pagina 6

Sfoglia online o scarica il pdf Manuale di avvio rapido per Porta d'ingresso Cisco DPC3925. Cisco DPC3925 12. Docis 3.0 cable modem

Stampa la pagina
Cisco DPC3925 Manuale di avvio rapido

Front Panel Description

The front panel of your residential gateway provides LED status indicators that
The front panel of your residential gateway provides LED status indicators that indicate how well and
indicate how well and at what state your residential gateway is operating.
at what state your residential gateway is operating.
1.
POWER
– ON, powers is applied to the wireless residential gateway.
1.
POWER
– ON, powers is applied to the wireless residential gateway.
2.
DS
– ON, the wireless residential gateway is receiving data from the cable
2.
DS
– ON, the wireless residential gateway is receiving data from the cable network
network
3.
US
– On, the wireless residential gateway is sending data to the cable network
3.
US
– On, the wireless residential gateway is sending data to the cable
4.
ONLINE
– ON, the wireless residential gateway is registered on the network and fully
network
operational
4.
ONLINE
– ON, the wireless residential gateway is registered on the network
5.
ETHERNET 1 – 4
– ON, a device is connected to one of the Ethernet ports. BLINKING indicates
and fully operational
that data is being transferred over the Ethernet connection
5.
ETHERNET 1 – 4
6.
WIRELESS LINK
– ON, the Wireless Access Point is operational. BLINKING indicates that data is
BLINKING indicates that data is being transferred over the Ethernet
being trasferred over the wireless connection. OFF indicates that the wireless access point has
connection
been disabled by the user
6.
WIRELESS LINK
7.
WIRELESS SETUP
– OFF (normal condition) wireless setup is not active. BLINKING indicates
indicates that data is being trasferred over the wireless connection. OFF
the user has activated wireless setup to add new wireless clients on the wireless network
indicates that the wireless access point has been disabled by the user
8.
TEL1
– ON indicates telephone service is enabled. Blinks when line 1 is in use. OFF indicates
7.
WIRELESS SETUP
that phone service for TEL1 is not enabled
BLINKING indicates the user has activated wireless setup to add new
wireless clients on the wireless network
9.
TEL2
– ON indicates telephone service is enabled. Blinks when line 2 is in use. OFF indicates
that phone service for TEL 2 is not enabled.
8.
– ON indicates telephone service is enabled. Blinks when line 1 is in
TEL1
use. OFF indicates that phone service for TEL1 is not enabled
9.
– ON indicates telephone service is enabled. Blinks when line 2 is in
TEL2
use. OFF indicates that phone service for TEL 2 is not enabled.
– ON, a device is connected to one of the Ethernet ports.
– ON, the Wireless Access Point is operational. BLINKING
– OFF (normal condition) wireless setup is not active.
Page 6 of 11