Cisco Expressway CE500 Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Porta d'ingresso Cisco Expressway CE500. Cisco Expressway CE500 16.

Installing

See

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/install.html#wp1341126

for information on how to install the unit in a rack.

Attach a power cord to the power supply in your server, and then attach the power cord to a grounded AC

power outlet. See

http://www.cisco.com/en/US/docs/unified_

computing/ucs/c/hw/C220/install/spec.html#wp1070378

The power button of the unit is located in the top left-hand corner of the front panel.

If this is the first time that the power switch has been turned on after connecting the power cable, the system

will perform a Self Test and the unit will automatically restart. This is expected behavior. The system will be

operational after it has booted up a second time. The first boot will take approximately 2 minutes.

To verify the power status look at the Power Status LED (see

unit.

[p.12]):

Off—There is no AC power present in the server.

Amber—The server is in standby power mode. Power is supplied only to the CIMC and some motherboard

functions.

Green—The server is in main power mode. Power is supplied to all server components.

Cisco Expressway CE500 Appliance Installation Guide (X8.5)

for power specifications.

Figure 3: Front view of the Cisco Expressway

Page 6 of 16