Fine elements SDA1193 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Bollitore Fine elements SDA1193. Fine elements SDA1193 5. Cordless jug kettle

Fitting a new plug

The mains lead must be connected as shown below. The wires are

coloured with the following code - Brown wire = Live (L), Blue wire =

Neutral (N), Green & Yellow = Earth (E).

• The Blue wire must be connected to the terminal marked N or

coloured Black.

• The Brown wire must be connected to the terminal marked L or

coloured Red.

• The Green & Yellow wire must be connected to the terminal marked E

or coloured Green.

• Check that there are no cut or stray strands of wire inside the plug.

• Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.

• If you are in any way unsure which plug or fuse to use, always refer to

a qualified electrician.

• After replacing or changing a fuse on a moulded plug, the cover must

be refitted to the plug; the appliance must not be used without a fuse

cover.

Technical Data

Voltage

Rated power

Capacity

Model Number

Waste electrical products should not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice.

Connect

Green &

Yellow to

Earth (E

)

Connect

Blue to

Neutral

(N)

220-240V AC 50/60Hz

1850 - 2200 W

1700ml

SDA1193

Connect

Brown to

Live (L)

Ensure the outer sheath of the

mains lead is securely held by the

cable clamp

Europasonic (UK) Ltd

Manchester M3 1JS