Cisco IG31R Series Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Porta d'ingresso Cisco IG31R Series. Cisco IG31R Series 6. Connecting a ground cable
Anche per Cisco IG31R Series: Installazione (6 pagine), Manuale di collegamento (2 pagine), Manuale di installazione dell'hardware (2 pagine)

Rebooting or Resetting a Gateway

3. To reboot or reset the device, make sure that the device is connected to power, and use a lengthened

standard size #1 paper clip with wire gauge 0.033 inch or smaller to press and hold the reset button:

• Press and hold the Reset button for 3 seconds: Reboots the device. Configuration settings are not

• Press and hold the Reset button for 10 seconds: Resets configuration options to factory default values

• Press and hold the Reset button for 30 seconds: Resets configuration options to factory default values,

See

Figure 5: Reset Button on the IG21, on page 4

(IG31R Shown), on page

Figure 5: Reset Button on the IG21

Rebooting or Resetting a Gateway

affected.

and triggers the plug-and-play (PnP) operation for the device. This operation does not erase the

modem APN.

erases the modem APN, and triggers the PnP operation for the device.

Rebooting or Resetting a Gateway

Figure 6: Reset Button on the IG21R or IG31R