Cisco Linksys SPA3102 Faq - Pagina 2
Sfoglia online o scarica il pdf Faq per Porta d'ingresso Cisco Linksys SPA3102. Cisco Linksys SPA3102 5. Troubleshooting spa device
Stampa la pagina
setting of the device.
In order to disable this feature, complete these steps:
1.
Click the User 1 or User 2 tab.
2.
Set VMWI Ring Splash Len to 0.
Q. I cannot access the voice menu when I press ****. What should I do?
A. Complete these steps:
1.
Unplug your Ethernet cable.
2.
Try to go into the IVR again.
3.
If it is successful, this indicates a misconfiguration on your network settings.
4.
Make sure that you have the correct DNS and gateway IP address.
Q. I lost the web password for my SPA device. How do I reset it?
A. In order to reset your SPA device to the factory default values, complete these steps.
1.
Unplug your Ethernet cable.
2.
Press **** in order to access the voice menu.
3.
Press 73738#.
4.
Login with the username user when you access http://spa-ip-address.
5.
Login with admin when you access http://spa-ip-address/admin/. Note: If you reset your
device, it erases all your current configuration settings. If your SPA device is provisioned by a
service provider, the reset function can be password protected. In this case, contact your
service provider.
Q. How do I enable the Admin web access (http) from the phone?
A. Complete these steps:
1.
From the IVR (voice menu), press 723646#.
2.
Press 1 in order to enable web admin access. 0, or No on the web, is the default and
disables it.
Q. How do I enable access to the SPA2102 Web Interface?
A. Complete these steps:
1.
Use the analog phone and press ****.
2.
From the IVR (voice menu), press 7932#.
3.
In order to enable this feature, press 1 and 1 again.
Q. How do I enable access to the SPA3102 Web Interface?
A. Complete these steps: