Cisco Physical Access CIAC-GW-K9 Installazione e configurazione - Pagina 19
Sfoglia online o scarica il pdf Installazione e configurazione per Porta d'ingresso Cisco Physical Access CIAC-GW-K9. Cisco Physical Access CIAC-GW-K9 26. Physical access gateway
Anche per Cisco Physical Access CIAC-GW-K9: Manuale di avvio rapido (17 pagine)
Stampa la pagina
Chapter 2
Installing and Configuring the Cisco Physical Access Gateway
Note
•
•
Repeat
Step 5
Perform additional configuration, verification, and monitoring tasks as described in the
Step 6
Access Manager User
Changing the User Password
You can also change the password for one or more Gateways using the Cisco PAM desktop software. See
Tip
the "Changing Gateway Passwords" section in the
information.
The Gateway password can be added/reset from CPAM also.
OL-32499-01
Reset Factory Defaults:This command deletes all information on the device (including log and
–
event data), resets the password and all other configurations to the factory default. Any custom
configurations previously entered on the device are also removed.
Delete Events: delete all events stored on the Gateway.
–
–
Delete Configuration: delete the module configuration. The configuration is automatically
dowloaded when the gateway establishes communication with the Cisco PAM appliance.
Delete Credentials: delete the credential data stored on the Gateway.The credential is
–
automatically downloaded when the gateway establishes communication with Cisco PAM
appliance.
Changes do not take effect until saved.
Delete Events,Delete Configuration,Delete Credentials includes an application reset of the gateway.
Step 1
through
Step 4
for each Gateway in the system.
Guide.
Configuring and Managing the Gateway Using a Direct Connection
Cisco Physical Access Manager User Guide
Cisco Physical Access Gateway User Guide
Cisco Physical
for more
2-19