Digium Digium Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Digium Digium. Digium Digium 18.

Resetting, Reconfiguring, or Restarting

Reset to Factory

Defaults

Digium Phone User Guide

To clear all configuration information in the phone and start over, select Reset to Fac-

tory Defaults (option 8) from the Phone Settings/Configuration Options.

CAUTION: This removes all existing accounts and contacts as well as

configuration information.

Click Advanced (option 5 of the Main Menu), then click Reconfigure (option 1 of

Advanced). The phone asks you to confirm the reconfigure request. Click Yes to

begin the operation. Reconfigure does not remove the current configuration until the

new configuration is obtained.

You can also reconfigure the phone from the Asterisk command line interface as fol-

lows:

sip notify digium-check-cfg <my sip peer>

This Asterisk command notifies the Digium Phone to get its configuration again.

Click the Restart (option 6 of the Main Menu) to restart the phone using the current

configuration.The phone asks you to confirm the restart.

The first three options under the Tech Support setting (option 7 from the Phone Set-

tings/Configuration Options page) are used only under Digium Technical Support

direction.

IMPORTANT: Do not use them unless it is at the request of Digium Technical

Support.

However, the Network Utilities option is available to give you quick access to the

following common network diagnosis tools:

Ping. Tests the reachability of a host on the Internet.

Traceroute. Displays the route (path) and measures transit delays of packets across

the network.

NSlookup. Queries the domain name system to obtain the domain name or IP address

mapping or for any other specific DNS record.

List mDNS Services. Lists the services being advertised via mDNS that the phone

can see on the network.

Resetting, Reconfiguring, or Restarting