Digium Digium Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Digium Digium. Digium Digium 18.

Digium Phone User Guide

Network & System Tools

As soon as your Digium Phone powers up, its main display shows the Digium logo

and indicates that it is initializing, loading necessary information, and starting the

phone. By default, the phone uses the dynamic protocols DHCP and LLDP-MED to

attempt to get its IP address and VLAN membership information. If successful, the

phone then attempts to find a configuration file.

The following sections describe what to do if your phone cannot get on the network

and needs to be configured.

If DHCP does not assign the phone an IP address, you can press the Settings softkey

to specify network and VLAN information, or press the Retry softkey.

•

DHCP is selected (highlighted) by default.

•

To enter the network information manually, press the Change softkey. This

changes the protocol from DHCP to Static, which requires you specify four-part

network addresses for the following:

•

Static IP

•

Gateway

•

Netmask

•

Primary DNS

•

Secondary DNS (optional)

•

When ready, press Save.

NOTE: The Normal softkey lets you switch between Numeric or IP keypad char-

acters. The Delete softkey lets you delete a character, and the Cancel softkey

redisplays the Phone Setup Options.