Cisco VG450 Installazione - Pagina 11

Sfoglia online o scarica il pdf Installazione per Porta d'ingresso Cisco VG450. Cisco VG450 13. Voice gateway

Installing the Cisco VG450 Voice Gateway

Figure 4: Chassis Ground Connection on the Router

Step 4

Connect the other end of the ground wire to a known reliable earth ground point at your site.

Power-On Procedure

Perform this procedure to power on your Cisco VG450 Voice Gateway, and verify that it goes through its

initialization and self-test. When this is finished, the Cisco VG450 Voice Gateway is ready to configure.

Danger

This unit might have more than one power supply connection. All connections must be removed to de-energize

the unit. Statement 1028

Danger

Installation of the equipment must comply with local and national electrical codes. Statement 1074

To power on the Cisco VG450 Voice Gateway, perform the following:

Step 1

Power on your terminal or PC, and configure it for 9600 bps, 8 data bits, 1 stop bit, and no parity.

Step 2

Move the Cisco VG450 Voice Gateway power switch to the ON position.

The green LED next to the auxiliary port come on and the fan starts to operate. If this does not happen, see the

Troublehooting section in this guide.

Installing the Cisco VG450 Voice Gateway

Power-On Procedure