Epson Perfection V750 Series Manuale d'uso - Pagina 8

Epson Perfection V700 Photo/V750 Pro

Placing Film in the Film Area Guide

You can scan film that cannot be placed in the film holders (up

to 8 × 10 inch film) using the film area guide in Professional

Mode. When scanning film using the film area guide, always

select

Film (with Film Area Guide)

Note: You cannot use DIGITAL ICE Technology when scanning film

with the film area guide. When scanning using the film area guide,

striped (newton) rings may appear in your scanned images.

1. Make sure the tab on the long edge of the film area guide is

on the left side.

2. Fold the tab along the perforated lines as shown.

3. Place the film area guide on the document table with the tab

facing the left side of the scanner.

8 - Epson Perfection V700 Photo/V750 Pro

as the Document Type.

12/05

4. Place the film in the film area guide (up to 8 × 10 inch film)

with the shiny base side facing down. Your images and any

wording on the film should appear backwards on the side

that faces up. Make sure the entire image frame is

positioned in the film area guide opening.

Note: Leave the part of the film area guide shown below

uncovered or colors in your scans will be affected.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6. Close the scanner cover.

Note: You cannot use Full Auto Mode or Home Mode when scanning

film with the film area guide.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 9.