Epson RX595 - Stylus Photo Color Inkjet Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Scanner Epson RX595 - Stylus Photo Color Inkjet. Epson RX595 - Stylus Photo Color Inkjet 17. Photo all-in-one ultra hi-definition
Anche per Epson RX595 - Stylus Photo Color Inkjet: Breve descrizione tecnica (11 pagine), Manuale rapido (48 pagine), Iniziare qui Manuale (8 pagine), Aggiornamento (1 pagine), Iniziare qui Manuale (7 pagine)
Stampa la pagina
Epson Stylus Photo RX595 Series
Removing and Installing Ink Cartridges
Caution:
Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
Remove the CD/DVD tray and return the output tray to the paper
position before replacing ink cartridges.
1. Turn on the RX595 Series.
If a cartridge is low or expended, you see a message on the
RX595 Series display screen. If a cartridge is expended, you
must replace it to be able to print. If a cartridge is low, you
can continue printing until the cartridge needs replacement.
If you're replacing a cartridge before you see a message on
the RX595 Series display screen, press the
select
, and press
Maintenance
and press
Ink Cartridge
2. Open the scanner.
3. Open the cartridge cover.
4. Squeeze the tab on the cartridge and lift the cartridge
straight up to remove it. Dispose of it carefully. Do not take
the used cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with
water. Keep ink cartridges out of the reach of children.
14
button,
Setup
. Then select
OK
Change
.
OK
5. Remove the cartridge from the package, but be careful not
to touch the green chip on the cartridge.
6. Remove the yellow tape from the
bottom of the cartridge.
Caution:
Do not remove any other labels or seals, or
ink will leak.
7. Insert the new cartridge into the holder and push it down
until it clicks into place.
8. Once you replace all the necessary cartridges, close the
cartridge cover and push it down until it clicks into place.
9. Close the scanner.
10. Press
to begin charging the ink. This takes about
OK
2 minutes. When you see a completion message on the
display screen, ink charging is finished.
Caution:
Never turn off the RX595 Series while ink is charging or you'll
waste ink.
If you see an ink replacement message on the display screen,
press OK and press down all the cartridges securely.
If you remove a low or expended ink cartridge, you cannot reinstall
and use the cartridge.
5/07