Epson Stylus CX8400 Series Manuale rapido - Pagina 31

Sfoglia online o scarica il pdf Manuale rapido per Scanner Epson Stylus CX8400 Series. Epson Stylus CX8400 Series 48. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Anche per Epson Stylus CX8400 Series: Manuale di servizio (20 pagine), Manuale (14 pagine), Opuscolo e specifiche (2 pagine), Manuale operativo (28 pagine), Iniziare qui Manuale (8 pagine), Aggiornamento (1 pagine), Manuale (4 pagine)

Stampa la pagina

Epson Stylus CX8400 Series Manuale rapido

Cleaning the Print Head

If print quality has declined and the nozzle check pattern indicates clogged

nozzles, you can clean the print head. Print head cleaning uses ink, so clean it only

if necessary.

Note:

You cannot clean the print head if an ink cartridge is expended or low. You must replace

the cartridge first (see page 33).

1. Load letter-size paper in the sheet feeder

(see page 5).

2. Press

Setup

3. Press l or r to select

4. Press d to select

5. Press x

Start

Cleaning lasts around 1 minute. When it's finished, you see a message on the

display screen.

Caution:

Never turn off the CX8400 Series during head cleaning or you may damage it.

6. Press x

Start

the print head is clean.

7. If there are still gaps or lines, or the test patterns are faint, run another

cleaning cycle and check the nozzles again.

Note:

If you don't see any improvement after cleaning the print head two times, turn off your

CX8400 Series and wait at least six hours to let any dried ink soften. Then try printing

again.

If you do not use your CX8400 Series often, it is a good idea to print a few pages at least

once a month to maintain good print quality.

Maintenance

Head Cleaning

to run a nozzle check (as described on page 30) to verify that

and press

Cleaning the Print Head