Digiwave ANT-5012 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Antenna Digiwave ANT-5012. Digiwave ANT-5012 2. New concept digital outdoor tv antenna passive version

(Fig.3)
Using the pole mounting accessories to fix the antenna on the balcony.
(Fig.4) connect the "F" male connector of the coaxial cable to the "F" female connector of the antenna, and wear
the water-proof cap to the end of the connected "F" connector.
Installation: Please take following (Fig.5) and (Fig.6) installation instruction for the reference.
Installation 1: Directly connected to TV(Fig.5)
Note: After the antenna mounting and installation is finished,
picture, then fix the antenna,organize the coaxial cable for neat, tidy and safety,
Please take reference of following positioning way to adjust the antenna position.
(Fig.8) through the fixing screws to adjust the antenna position in left or right direction (outdoor using)
(Fig.9)through turning the antenna body to adjust the antenna position in left or right direction (indoor using)
Operation Instruction:
Note:For the best reception,Please check the following conditions
1. Keep the antenna away from the sources of interference: keep the
antenna away from those big power consumption devices,such as air
conditioner,elevator,hair dryer and microwave oven...ect.
2. Place the antenna near windows when use the antenna in indoor
environment.
3. Install the antenna as high as possible: in digital terrestrital
reception,if there are some interceptions between antenna and
transmission tower,it will cause the signal loss temporary. So if the
antenna is installed as possible, those interceptions will be reduced.
Outside
Inside
Fig.4
Turning left/right 45
0
Fig.8
Technical Support: [email protected]; www.digiwave.ca
75Ω cable
Installation 2: Connected Through set-top-box (Fig.6)
please adjust the antenna in the best position that can get clear TV
Fig.8
Fig.9
please face the antenna to the TV signal
set-top box
transmitter tower direction