DigiWeigh DW97PAM04 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Bilance DigiWeigh DW97PAM04. DigiWeigh DW97PAM04 16. Digital counting scales

OPERATION

ZEROING THE DISPLAY

You can press the ZERO key at any time to set the zero point from which all
other weighing and counting is measured, It is active within 4% of power up
zero. This will usually only be necessary when the platform is empty. When
the zero point is obtained the Weight display will show the indicator for zero.
The scale has an automatic re-zeroing function to account for minor drifting or
accumulation of material on the platform. However you may need to press
ZERO to re-zero the scale if small amounts of weight are shown when the
platform is empty.

TARING

There are two methods to enter a tare value. The first uses the weight on the
platform and the second uses a value input by the user.

Normal Tare:

 Zero the scale by pressing the ZERO key if necessary. The zero
indicator will be on.
 Place a container on the platform, a value for its weight will be
displayed.
 Press the TARE key to tare the scale. The weight that was displayed is
stored as the tare value and that value is subtracted from the display,
leaving zero on the display.
 The "Net" indicator will be on. As product is added only the weight of
the product will be shown. The scale could be tared a second time if
another type of product was to be added to the first one. Again only the
weight that is added after taring will be displayed.
 When the container is removed, a negative value will be shown. If the
scale was tared just before removing the container this value is the
gross weight of the container plus all product that was removed. The
zero indicator will also be on because the platform is back to the same
condition it was when the ZERO key was last pressed.
 Press the TARE key again to remove the tare weight .

Pretare:

 This method allows you to enter a value for the tare weight from the
keypad. This is useful if all containers weigh the same, or if the
container is already full but the net weigh is required and the tare
weight of the container is known.
SCALES usa © 2004
Page 9 of 16