Argos Newport Manuale di istruzioni per il montaggio - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni Argos Newport. Argos Newport 16. 3 door robe
Assembly Instructions
Step 13
Fit the back panels
a:
Square up the unit by
making sure that
measurement x:x equals
y:y.
Place the small back
and large back
11
onto the unit as shown.
Make sure that the 2
backs are pushed up
tight against each other
and that they meet in the
centre of the divider's
back edge.
b:
Nail
around the
J
outside edges of the 2
backs.
Note: Do not nail where
the 2 backs meet and
nails should be spaced
about 150mm apart.
c:
Push the 6 nail
screws
through the 6
K
back holders
and tap
L
them down between the
small back
and large
10
back
and into the
11
back edge of the divider
.
.
3
Keep tapping the nail
screws
in until the
K
back holders
dig into
L
the small and large back.
9
a:
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
10
down,
y
y
b:
J
10
x
x
Note: If ever you need to take
the backs off to dismantle the
unit, the nail screws can be
taken out using a screwdriver.
K
c:
L
x
x
+
K
L
11
K
L
10
L
11
Note: These can
also be round
y
y