Digoo DG-8291B Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Stazione meteorologica Digoo DG-8291B. Digoo DG-8291B 2. Charged themometer clock

Stampa la pagina

USER MANUAL

Charged Themometer Clock

DG-8291B

Features & Beneﬁts:

Display unit & outdoor sensor

1. Time display

2. Alarm icon

3. Calendar

4. Display low battery indicator

5. Charging 1 icon

6. Charging 2 icon

7. Indoor temperature and humidity

8. SNZ/LIGHT button

9. SET button

10. UP button

11. DOWN button

12. ALARM button

13. NAP button

14. Battery Compartment 2xAAA (batteries not included)

15. External power supply socket

16. USB Charge 1

17. USB Charge 2

Package Contents:

1. Display Unit

2. USB Line

3. Instructions Manual

Installing or Replacing Batteries:

We recommend using high quality batteries for the best product

performance. Heavy duty or rechargeable batteries are not recommended.

Note:

Do not mix old and new batteries. Do not mix alkaline, standard,

and/or rechargeable batteries.

The battery is only used as a backup battery, don't use as main

power supply, please use the USB line.

Default settings:

1. Default time: 00: 00(Time form: 24H)

2. Default date: 01/01 (Year: 2016, date form: M/D)

3. Default week: FRIDAY

USB Line

4. Default temperature: °C

5. Default alarm: ALARM 1: AM 6:30, Monday - Friday; ALARM 2: AM 7:30,

Weekend, default snooze time: 10min.

The LCD display fully for 3 seconds when changing new battery or

resetting, then with a sound BI into the normal state, after testing

temperature.

Display / Keys Details:

There are totally 6 keys for the alarm clock, they are included:

SET, UP, DOWN, ALARM, NAP, SNZ/LIGHT

1. SET buttons:

a. Press and hold for 5 seconds during normal mode to enter

setting mode.

2. UP buttons:

a. Press to increase the setting value during setting.

b. Press and hold 3 seconds button for fast adjust during setting mode.

c. In normal display mode, press this button to switch between 24H and

12H at any time

3. DOWN button:

a. Press to decrease the setting value during setting.

b. Press and hold 3 seconds button for fast adjust during setting mode.

4. ALARM button

a. Press the ALARM button to show alarm time.

c. In alarm mode, press and hold for 3 seconds enter alarm setting mode

5. NAP button

a. Press the NAP button to enter nap mode.

b. Press and hold the NAP button to enter nap time setting.

6. SNZ/LIGHT button:

a. Press this button to open backlight for 10 seconds (without USB line).

b. Press to activate the snooze function when alarming

c. Press this button to adjust the brightness of the back light:

HI→LO→OFF (with USB line).

Manually Setting the Time, Date & Units:

Press and hold down the "SET" button for 3 seconds the language starts

to flash, use "UP" and "DOWN" buttons to set the required language.

Three languages to choose: ENGLISH, ESPANOL and GERMAN

Press "SET" button to confirm your setting, the BEEP starts to flash, use

"UP" or "DOWN" buttons to turn on or turn off the beep sounds.

Press "SET" button to confirm your setting, the HOUR display starts to

flash, use "UP" or "DOWN" buttons to set the correct hour.

Press "SET" button to confirm your setting, the MINUTES display starts to

flash, use "UP" or "DOWN" buttons to set the correct minutes.

Press "SET" button to confirm your setting, the YEAR display starts to

flash, use "UP" or "DOWN" buttons to set the correct year.

Press "SET" button to confirm your setting, the MONTH display starts to

flash, use "UP" or "DOWN" buttons to set the correct month.

Press "SET" button to confirm your setting, the DATE display starts to

flash, use "UP" or "DOWN" buttons to set the correct date.

Press "SET" button to confirm your setting, the temperature unit start to

flash, use "UP" or "DOWN" buttons set the required temperature unit.

Press "SET" button to confirm your setting, the SNOOZE start to flash,

use "UP" or "DOWN" buttons set the required snooze time.

Press "SET" button to confirm your setting and to end the setting

procedures, enter the normal mode.

NOTE: You will automatically exit settings mode if no buttons are pressed

for 17 seconds. Enter settings mode again at any time by pressing and

holding the SET button for 3 seconds.

Setting the Alarm:

a. Press ALARM button to enter alarm mode to check the alarm time.

b. In alarm mode, press and hold the ALARM button, located on the back

of the display unit for about 3 seconds to set the ALARM 1. The alarm

hour will begin blinking on the display where the clock time is usually

shown, use "UP" or "DOWN" buttons (press and hold to fast adjust)

set the required hour.

c. Press ALARM button to confirm your setting, the minutes start to flash,

use "UP" or "DOWN" buttons (press and hold to fast adjust) set the

required minutes.

d. Press ALARM button to confirm your setting, the alarm type start to

flash, use "UP" or "DOWN" buttons set the required type. Three types

to choose: SINGLE, MON-FRI, WEEKEND.

e. To turn the alarm ON or OFF, press the ALARM button to enter alarm

mode, press the SET button again to ON or OFF the alarm. The "

symbol should show next to the clock display when alarm is set to ON.

Press the SET button again to turn off the alarm, when the alarm is set

to OFF, the "

NOTE: a. The ALARM 2 is same operation as the ALARM 1.

b. The alarm will be turned ON when you set the alarm.

Alarm and snooze:

The alarm will sound in the following sequence:

• 1 Beep for 0-9 seconds.

• 2 Beeps for 10-19 seconds.

• 4 Beeps for 20-29 seconds.

• Constant beeps for 31-120 seconds

• While the alarm is beeping, the alarm icon

• While the alarm is beeping, press the "SNZ/LIGHT" to active snooze.

The alarm will "snooze" for 10 minutes, and then resume beeping.

• To turn the alarm off, press any key other than "SNZ/LIGHT" to return

to normal time mode. It will display "GOOD MORNING" for 3s when you

turn the alarm off.

" symbol should not display.

will flash.