TomTom 1N01.081 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per GPS TomTom 1N01.081. TomTom 1N01.081 48. User manual

Switching on and off

To switch your TomTom ONE on or off, press and hold the On/Off button for

2 seconds. The first time you switch on, it may take up to 20 seconds to start.

Note: In rare cases, your ONE may not start correctly. If this happens, press

the reset button, then switch on the device again.

Setting up

To set up your TomTom ONE you need to answer a few questions by tapping

the screen.

Important: Take care to select the correct language, since the language you

choose will be used for all menus and written instructions.

The Driving View is shown in black and white until your ONE locates your

current position.

The buttons on your ONE are shown in full color unless a button is currently

unavailable. For example, the button named Find alternative... in the Main

Menu is not available until you have planned a route.

For information on connecting your computer, see Using TomTom HOME on

page 41.

When you attach your ONE to a computer using a USB cable, you are asked if

you wish to connect to the computer. If you select No, the device will switch

off if you do not tap the screen for three minutes. This happens so that the

battery can recharge at a faster rate.

For information on connecting your computer, see Using TomTom HOME on

page 41.

Note: Your TomTom ONE uses a small amount of battery power to remember

the last screen being shown when the device is switched off.

If you do not charge your ONE for a prolonged period of time, the next time

you start your ONE it will show the default starting screen. All other device

settings will still be maintained.