Epson FX-880+ Manuale rapido - Pagina 6

Sfoglia online o scarica il pdf Manuale rapido per Accessori per stampanti Epson FX-880+. Epson FX-880+ 33. Epson serial impact dot matrix printers
Anche per Epson FX-880+: Manuale di configurazione (33 pagine), Opuscolo e specifiche (24 pagine), Manuale (18 pagine), Specifiche tecniche (2 pagine), Leggete prima questo (2 pagine), Manuale di riferimento (34 pagine)

Stampa la pagina

Changing default settings

Follow these steps to enter the

default-setting mode and change the

printer's default settings:

Note:

❏ To print the language selection and

default-setting mode instructions, you need

three sheets of A4 or letter size single-sheet

paper or three pages of continuous paper that

is at least 279 mm (11 inches) long and 210

mm (8.3 inches) wide. See "Continuous

Paper with the Pull Tractor" and "Single

Sheets with the Paper Guide" for

instructions on loading continuous paper

and single sheets.

❏ If you use single sheets, you need to load a

new sheet of paper each time the printer ejects

a printed sheet from the paper guide.

1. Make sure paper is loaded and the

printer is turned off.

2. Turn on the printer while holding down

the Font button.

The printer enters the default-setting

mode and prints the language selection

instructions (one page).

3. Press the Font button until the Font and

Pitch lights indicate the language you

want, as described in the language

selection instructions.

4. Press the Tear Off/Bin button to print the

default-setting mode instructions (two

pages) in the language you selected.

Downloaded from:

http://www.usersmanualguide.com/

Caution:

Whenever you turn off the printer,

wait at least five seconds before

turning it back on; otherwise, you

may damage the printer.

EPSON FX-880+/FX-1180+ Quick Guide

The printed instructions list the settings

you can change, describe how to change

them, and show you how the control

panel lights help you make settings. Use

these instructions to change the printer's

default settings from the control panel.

Note:

The arrows in the instructions indicate the

printer's current settings.

5. When you finish making settings, turn

off the printer and exit the

default-setting mode.

Note:

You may exit the default-setting mode by

turning off the printer at any time. Any

settings you have made remain in effect until

you change them again.

Default Settings (4/4)