TomTom LINK 3000 Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per GPS TomTom LINK 3000. TomTom LINK 3000 25. Vehicle tracking device

Connect TomTom LINK 300 to the vehicle

power supply with the standard vehicle

voltage (12 V / 24 V). Do not connect to a

voltage converter. The three wires GND, IGN

and PWR+ (supply voltage) must be

connected.

1. Connect the GND wire (brown) to ground

(clamp 31).

2. Fuse the PWR+ wire (red) and the IGN wire

(black) with one 2 A / fast blow fuse

(Technical data on page 24) each.

3. Connect the fused PWR+ wire (red) to the

carry current (clamp 30).

4. Then connect the fused IGN wire (black) to

ignition (clamp 15).

5. If you do not want to record digital inputs,

then connect the IN1 wire (green/blue) to

GND. If you want to record a digital input,

connect the IN1 wire (green/blue) to a 2 A /

fast blow fuse (Technical data on page 24),

then connect the fuse to a switch which is

connected to the power supply. For further

details see www.tomtomwork.com/in1.

6. Insert the 4-pin plug into the power cable

connector.

Connecting to power

Connecting to

power