TomTom Navigator Navigator 3 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per GPS TomTom Navigator Navigator 3. TomTom Navigator Navigator 3 47. Wireless gps receiver
Anche per TomTom Navigator Navigator 3: Manuale d'uso (14 pagine), Manuale di avvio rapido (44 pagine), Manuale d'uso (12 pagine)

Stampa la pagina

1. Installation

Chapter 1

Before you start...

Installation

If you have purchased TomTom NAVIGATOR on a TomTom memory card,

insert the memory card in your device. Then go to step 4 below.

If you are installing TomTom NAVIGATOR from a DVD do the following:

1. Connect your device to your computer, or insert the memory card you are

using into a card reader/writer attached to your computer.

2. Insert the DVD in your computer.

3. Follow the instructions in the setup program.

When setup is finished, disconnect your device from your computer or

insert the memory card into your device.

4. Switch on your GPS receiver.

5. Launch TomTom NAVIGATOR by tapping or selecting the TomTom button

in your device menu.

You have to answer a few questions to set up TomTom NAVIGATOR. Answer

the questions by tapping the screen or by using the joystick.

Note: TomTom GPS receivers connect automatically when you start

TomTom NAVIGATOR. If you are using a different GPS receiver, refer to the

receiver's user manual for instructions.

Tap or select buttons

On devices with a touchscreen you tap buttons. On devices without a

touchscreen you select buttons. This user guide always refers to tapping

buttons.

On mobile phones, many buttons are numbered. You can select those buttons

using the number keys on your phone.

Note: Depending on your device, the images shown in this manual may

look different to the screen on your device.

Activation

You will be asked how you want to activate the map that comes with

NAVIGATOR. There are two ways to do this:

• Automatically

To activate automatically, your device must have an active wireless data

connection (GPRS, EDGE, UMTS or CDMA).