DIHL WF-21BD Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Raffreddatore per vino DIHL WF-21BD. DIHL WF-21BD 10. Wine refrigerator

Installation Instructions

Before using your wine refrigerator

Remove the exterior and interior packing

Check to be sure the following parts are included:

For WF-21BD,

6 Metal Shelves.

1 Instruction Manual.

1 Handle Including 2 Screws

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during

transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Place your appliance on a floor that is strong enough to support the appliance when it is fully

loaded. To level your appliance, adjust the front legs at the bottom of the appliance.

Keep the appliance away from direct sunlight and sources of heat (stove, heater, radiator,

etc.).Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Extreme cold or hot ambient temperatures may also cause the appliances not to

perform properly.

Not designed for placement in garage or basement. Designed for use inside the home.

Improper use of the grounded plug can result in the risk of electrical shock. If the power

cord is damaged, have it replaced by an authorized Products service center.

This unit should be properly grounded for your safety. The power cord of this unit is equipped with a

3-pin plug which mates with 3-pin wall outlets to minimize the possibility of electrical shock. Do not

under any circumstances cut or remove the ground wine from the power cord supplied.

Use of extension cords is not recommended.

This unit requires a standard 220V-50HZ electrical outlet with 3-pin plug.

The cord should be secured behind the wine refrigerator and not let exposed or dangling to prevent

accidental injury.

Save these instructions

Warning