Acuity Brands Lighting Lithonia Lighting HLF LED Manuale di istruzioni per l'installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Apparecchiature di illuminazione Acuity Brands Lighting Lithonia Lighting HLF LED. Acuity Brands Lighting Lithonia Lighting HLF LED 7.
Stampa la paginaInstallation Instructions
HLF LED
YOKE (YKC6x) INSTALLATION INSTRUCTIONS
NOTE: Luminaire can be tilted up to 185 degrees above horizontal. This luminaire is pre-wired with UL-listed supply
wire leads. It is not necessary to access the fixture housing to install or wire the luminaire.
Tools and Required:
• 3/4" Socket Wrench
1. For the center hole, it is recommended to use a 5/8" bolt with corresponding lock washer and nut. For the outer two
holes or slots, it is recommended to use ½" bolts with corresponding lock washers and nuts.
NOTE: Mounting hardware is not included and it is up to the installer to determine the most appropriate hardware for
the desired mounting location.
HLF1 with yoke (YK) mount
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 •
© 2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/13
Yoke Mounting Plate Template Note: This
drawing is NOT to scale and should be used
for dimensional purpose only.
HLF2 with yoke (YK) mount
www.lithonia.com
5 year limited warranty
Part Number: RJ521380 Rev C
Revision Date: 12-4-19