Epson PLQ-20 Manuale di configurazione - Pagina 17
Sfoglia online o scarica il pdf Manuale di configurazione per Accessori per stampanti Epson PLQ-20. Epson PLQ-20 20. 24-pin dot matrix printers
Anche per Epson PLQ-20: Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine)
Stampa la pagina
When loading paper
Use passbooks and paper that have more than 60%
reflectance.
When you use a passbook, set Passbook mode to On and set
Binding mode to the method for the passbook's binding in the
default settings mode.
Do not load passbooks that are creased or have ripped seam.
Do not use a passbook that has any metallic parts such as
staplers or metal clips.
Do not use a passbook with sticky parts such as stamps or
seals.
Do not use a passbook that has any pages smaller than the
cover page.
Do not print on the front or back cover of a passbook. Printing
can be done only when the passbook is opened.
When you use paper that is shorter than 110.0 mm, set the
paper eject direction to front. The factory set default is front.
Refer to the Programming Guide for details.
Do not insert paper that is curled or has been folded into the
slot when you load it.
Do not punch holes in the area from 25.0 to 40.0 mm from the
left edge of paper.
When operating the printer
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Keep it away from
direct sunlight, strong light, heat sources or excessive
moisture or dust.
Safety Instructions
2
2
2
2
2
2
2
2
2
2
2
2
17