Crow SWAN QUAD Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Sensori di sicurezza Crow SWAN QUAD. Crow SWAN QUAD 2. Pir motion detector with pet immunity up to 25 kg
Anche per Crow SWAN QUAD: Istruzioni per l'installazione (2 pagine)
Stampa la pagina
S W A N Q U A D
PIR MOTION DETECTOR With PET IMMUNITY up to 25 kg
SETTING UP THE DETECTOR
PET IMMUNITYJUMPER SETTING
This jumper is used for setting the PET Immune
function - up to 15kg or 25kg, depending on the pet
size.
Immune to pet
weighting up to 15 kg
Immune to pet
weighting up to 25 kg
PULSE WIDTH JUMPER SETTING
This jumper is used for setting the PULSE count
function in order to provide PIR sensitivity control
according to the environment.
Very stable environment
Jumper #1 = ON
Without PET
Moderate nuisance situation
Jumper #2 = ON
PET up to 15 kg
Relatively high chance of false
alarms
Jumper #3 = ON
PET up to 25 kg
LED ENABLE JUMPER SETTING
This jumper is used for setting - LED Enable / Disable.
ON -
LED ENABLE. The LED will
activate when the detector is in
alarm condition.
OFF -
LED DISABLE, The LED is
disabled.
Note: The LED Switch does not affect the operation of
the relay.
When an intrusion is detected, the LED will activate
and the alarm relay will switch into alarm condition for
2 sec.
PIR SENSITIVITY ADJUSTMENT
Use the Potentiometer marked "SENS" to adjust the
detection sensitivity between 15% and 100%, according
to walk test in the protected area.
(Factory set to 57%)
Rotate the potentiometer clockwise to increase range,
counter-clockwise to decrease range.
BLOCK CONNECTOR
SENSITIVITY
ADJUSTMENT
TAMPER
PULSE WIDTH JUMPER
PYROSENSOR
Fig.5
BRACKET INSTALLATION OPTION
Ceiling bracket base
Wall bracket base
Fig. 6
INSTALLATION INSTRUCTIONS
TECHNICAL SPECIFICATION
MODEL
Detection Method
Power Input
Current Draw
Temperature
LED
Compensation
Pulse Width
LED
Alarm Period
JUMPER
Alarm Output
Tamper Switch
Warm Up Period
PET IMMUNITY
JUMPER
LED Indicator
Operating Temperature
RFI Protection
EMI Protection
Dimensions
Weight
N345
SWAN QUAD
Quad (Four element) PIR
8.2 to 16 VDC
Standby: 8mA (± 5%)
Active: 10mA (± 5%)
YES
Adjustable
2 sec (± 0.5sec)
N.C 28VDC 0.1 A with
27Ohm series protection
resistor
N.C 28VDC 0.1A with
10 Ohm series protection
resistor - open when cover
is removed
60sec (± 5sec)
LED is ON during alarm
°
°
-20
C to +60
C
30V/m 10 - 1000MHz
50,000V of electrical
interference from lightning
or power through
92mm x 59mm x 37mm
40gr