AEMC instruments 2110.88 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura AEMC instruments 2110.88. AEMC instruments 2110.88 4. Ac current probe

Stampa la pagina

Tips for Making Precise Measurements

■

When using a current probe with a meter, it is important to select the range that provides

the best resolution. Failure to do this may result in measurement errors.

■

Make sure that probe jaw mating surfaces are free of dust and contamination.

Contaminants cause air gaps between the jaws, increasing the phase shift between

primary and secondary. It is very critical for power measurement

MAINTENANCE

Warning:

■

For maintenance use only original factory replacement parts.

■

To avoid electrical shock, do not attempt to perform any servicing unless you are

qualified to do so.

■

To avoid electrical shock and/or damage to the instrument, do not get water or other

foreign agents into the probe.

Cleaning:

To ensure optimum performance, it is important to keep the probe jaw mating surfaces clean at

all times. Failure to do so may result in error in readings. To clean the probe jaws, use very fine

sand paper (fine 600) to avoid scratching the jaw, then gently clean with a soft oiled cloth.

REPAIR AND CALIBRATION

You must contact our Service Center for a Customer Service Authorization number

(CSA#). This will ensure that when your instrument arrives, it will be tracked and processed

promptly. Please write the CSA# on the outside of the shipping container.

Chauvin Arnoux

15 Faraday Drive

Dover, NH 03820 USA

Phone: (800) 945-2362 (Ext. 360)

Fax:

E-mail:

(Or contact your authorized distributor)

NOTE: All customers must obtain a CSA# before returning any instrument.

TECHNICAL AND SALES ASSISTANCE

If you are experiencing any technical problems, or require any assistance with the proper

use or application of this instrument, please contact our technical hotline:

Chauvin Arnoux

15 Faraday Drive

Dover, NH 03820 USA

Phone: (800) 343-1391 (Ext. 351)

Fax:

E-mail:

LIMITED WARRANTY

The current probe is warrantied to the owner for a period of two years from the date of

original purchase against defects in manufacture. This limited warranty is given by AEMC

Instruments, not by the distributor that it was purchased from. This warranty is void if the

unit has been tampered with, abused, or if the defect is related to service not performed by

AEMC

Instruments.

Full warranty coverage and product registration is available on our website at:

www.aemc.com/warranty.html.

Please print the online Warranty Coverage Information for your records.

, Inc. d.b.a. AEMC

(603) 749-6434 (Ext. 360)

(603) 742-2346 or (603) 749-6309

[email protected]

, Inc. d.b.a. AEMC

(603) 742-2346

[email protected]

Instruments

99-MAN 100125.v9 08/22