Epson Stylus Color 880i Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Accessori per stampanti Epson Stylus Color 880i. Epson Stylus Color 880i 13. Windows printer software does not install
Anche per Epson Stylus Color 880i: Scheda tecnica (2 pagine), Scheda informativa sul prodotto (4 pagine), Inizia qui (4 pagine), Opuscolo (2 pagine), Manuale di risoluzione dei problemi (1 pagine)

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year. Follow these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can damage

the printer components and case.

Don't use a hard or abrasive brush.

Don't get water on the printer components and don't spray

lubricants or oils inside the printer.

Don't use any cleaning sheets included with special media;

they may jam inside the printer.

If you move your printer some distance, you need to prepare it

for transportation in its original box. Follow these steps:

To avoid damage, always leave the ink cartridges installed

when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 9); if output is

misaligned, align the print head (see page 10).