Argosy HD 360U Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Immagazzinamento Argosy HD 360U. Argosy HD 360U 11. Usb 2.0 3.5" external hard disk drive
Anche per Argosy HD 360U: Specifiche tecniche (1 pagine)

Stampa la pagina
Partition The External Hard Disk Drive
Using FDISK Under Windows 98SE/Me
FDISK is a program to create one or more partitions of the hard disk, after the partition was built and
formatted, data can be write to the hard disk.
To partition the external hard disk, you must execute FDISK under the MS-DOS mode under
Windows 98SE/Me, please follow the steps:
1.
Boot-up the computer into Windows 98SE/Me system. Plug the external hard disk to computer,
and make sure it is recognized.
2.
Go into the MS-DOS mode by click on Start
3.
At the DOS prompt, type 'FDISK' and press Enter.
4.
In the first screen of FDISK, answer the question: Do you want to enable large disk support?
Y
if you want to create a partition larger than 2GB (FAT32).
N
if you want to create a partition small than 2GB (FAT16).
5.
The next screen is 'FDISK OPTIONS',
IMPORTANT: you must type 5 on this screen to change the current fixed disk drive, the
default fixed drive set by FDISK is your internal hard disk, if you don't change
it to the external hard disk, the data of internal hard disk will be destroyed.
Note: If the option 5 doesn't appear on this screen means the external hard disk is not installed
properly, please check with the software installation.
Programs
MS-DOS Prompt.