Dillon ED-2000plus Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Dillon ED-2000plus. Dillon ED-2000plus 20. Electronic dynamometer with hr-2000 remote

Stampa la pagina

Configuration Mode

Key

Function

Scroll down in list of information fields, i.e. the

PEAK HOLD

next field in the list.

Scroll up in list of information fields, i.e. the

TEST

previous field in the list.

Show the label of the current information field.

UNITS

Increment the value shown with wraparound.

F+PEAK HOLD

Decrement the value shown with wraparound.

F+TEST

Return to basic function mode.

F+CLR/ZERO

To activate the configuration mode from normal operation, use one hand to

press and hold the F key and use the other hand to press the TEST key.

Return to normal operations by using one hand to press and hold the F key

and use the other hand to press the CLR/ZERO key.

Upon entering configuration mode, the selected unit annunciator will flash

(indicating that the device is out of the normal operating mode) and the

display will show the current value for setpoint 1.

The configuration values may be changed and permanently stored in nonvola-

tile memory within the device. Consequently, use these functions with care.

Note that the values will be changed immediately in the EEPROM, but some

changes will only take effect when the unit is switched off and then back on.

These values are noted with an asterisk in the "Label" column of Table 5

Table 4 shows the keys you use to set configuration to your needs. Table 5

contains the configuration items you can view and change.

Table 4

Key Functions in Configuration Mode

Table 5 contains the information fields and typical values you can view in the

configuration mode. The fields appear in the sequence shown. Scrolling past

the last item in the list will return the display to the first item in the list.

Display

The "label" for the field is shown briefly

when the key is kept depressed. The

actual information value is then shown.

Same as for PEAK HOLD.

Dependent upon function selected.