Dillon EDjunior Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura Dillon EDjunior. Dillon EDjunior 20. Dynamometer

Setup

Misc

Sometimes the individual

soft keys are referred to as

the F1, F2, F3 and F4 keys as

numbered from left to right.

Setup

About

Dillon suggests that calibration

data be recorded and saved.

Press the Misc key to access the following soft key set (refer to Figure 3):

Flash

Press this soft key to enable or disable the "display flash"

feedback. If enabled, the press of a key causes the display to

momentarily flash to give you a visual feedback that the key was

activated.

Zero

Press this soft key to enable or disable the Zero key's ability to

also clear the Peak force value. If you enable this function,

press the Zero key to clear the Peak force and zero the load. If

you disable the function, the Zero key will only zero the load.

Peak force remains in effect and will only be cleared with the

Clear function during operation.

Contr

Press this key to adjust the contrast of the LCD display. Press

the Down soft key to lighten the contrast. Press the Up soft key

to darken the contrast.

There is a keypad shortcut for increasing and decreasing

contrast. While in normal display mode press Arrow key and F2

simultaneously to increase contrast. Press Arrow key and F1

simultaneously to decrease contrast.

The next soft key is the About. The About menu shows an assortment of

information about your Dillon instrument. This can be handy for maintaining

calibration, troubleshooting or determining if the firmware can be upgraded.

Press this and access the following soft key set (refer to Figure 3):

Device

Press this to see software revision and dynamometer informa-

tion.

Calib

This soft key access the following soft key set:

Points

Press this key to display the calibration loading points.

EDjunior Dynamometer User's Manual