AEMC instruments DIGITAL FLEXPROBE 4000D-24 Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura AEMC instruments DIGITAL FLEXPROBE 4000D-24. AEMC instruments DIGITAL FLEXPROBE 4000D-24 20.

Stampa la pagina
5.1
•
•
•
•
5.2
The battery must be replaced when the
steady on the display.
1. Use a screwdriver to unscrew the two closing screws on the back of
2. Replace the old battery with a new battery (1.5V or AAA super-alkaline
3. Close the housing; make sure that it is completely and correctly closed.
4. Screw both screws back in.
Digital Flexprobe
1.800.561.8187
Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.

Cleaning

Disconnect the instrument from any source of electricity.
Use a soft cloth lightly moistened with soapy water.
Wipe with a moist cloth and then dry with a dry cloth.
Do not allow water or other foreign substances into the case.
Never use alcohol, solvents or hydrocarbons.

Replacing the Batteries

Disconnect the instrument from any source of electricity.
the housing.
batteries).
Used batteries must not be treated as ordinary household waste.
Take them to the appropriate recycling collection point.
®
Models 400D & 4000D
www.
CHAPTER 5

MAINTENANCE

.com
®
will not be held
symbol flashes or remains
17