Acuity Controls ATRIUS ECYA1000 Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Relè Acuity Controls ATRIUS ECYA1000. Acuity Controls ATRIUS ECYA1000 14.

5-0 Communications Wiring

Controllers are uniquely identified on the network by their MAC address.

This identifier is printed on a label located on the side of the controller and

on its shipping box. Get a printed copy of the building's floor plan. During

controller installation, peel the MAC address stickers off of the shipping box

and put it on the floor plan where the controller has been installed. This

MAC address is used as part of the controller's factory-default Wi-Fi access

point name and its network hostname.

There are two methods to connect to the controller: wired (Ethernet

connection) or wireless (when the ECLYPSE Wi-Fi Adapter is connected to

the controller).

Network connections can be daisy-chained.

Connector

To Router /

Next IP Device

Figure 14: Communication Wiring

Cat 5e

Network

RJ-45

Cable

To Next IP

Device

Bar Code

ID: MAC Address

Model: ECY-S1000

For example, for a MAC Address of : 76:a5:04:cd:4a:d1

The factory-default name for the Wi-Fi access point is ECLYPSE-CD4AD1

The factory-default hostname is eclypse-cd4ad1.local

Figure 13: Finding the Controller's MAC Address

Connect the WiFi Adapter to one of the HOST connector of the server

module.

Once the ECLYPSE Wi-Fi Adapter has been connected to the controller, a Wi-

Fi hotspot becomes available that allows you to connect to the controller's

configuration Web interface with your PC.

On your PC's wireless networks, look for an access point named ECLYPSE-

XXYYZZ where XXYYZZ are the last 6 hexadecimal characters of the

controller's MAC address (see above). The default password for the wireless

network is: eclypse1234.

Connect the BLE Adaptor to one of the HOST connectors of the server

module.

Label

9 of 14